Join Our Discord Server!

Best Settings for Fanatec GT DD Pro

19 replies · last update

EquipmentBest Settings for Fanatec GT DD ProFanatec GT DD Pro Settings - Wheelbase SEN - AUT FFB - 100 FFS - Peak NDP - 15 NFR - 10 NIN - 5 INT - 3 FEI 100 FOR 100 SPR - OFF DPR - 50Read the article
Ctrl + Enter to send
GG
Greg G.20
· 21 Apr 2026, 15:13

Hello,

Here are my 2026 settings for the GT DD PRO 8 NM with the BMW M3 GT2 V2 wheel

SEN  : AUTOMATIQUE

FFB : 100 

FFS : PEAK

NDP : 20 

NFR : 5

NIN : OFF 

INT : 5 

FEI : 90 

FOR : 100 

SPR : OFF 

DPR : OFF 

BLI : 100 (ADJUST TO YOUR PREFERENCES)

BRF : 60 (ADJUST TO YOUR PREFERENCES AND YOUR CRANKSET AND ITS SETTING)

V3 CRANKSET WITH PERFORMANCE KIT AND ELASTOMERS SET TO SOFT.

PEDAL SCREW SET TO MINIMUM FOR MAXIMUM PEDAL TRAVEL.

 

GRAN TURISMO 7 SETTINGS IN-GAME

Force Feedback Max Torque: 6 (Depends on the car, 3 for Gr.1, 4 for Gr.2, 5,6 for Gr.3, 7 for Gr.4)

Force Feedback Sensitivity: 1

There is clearly a difference in feel now in the force feedback sensitivity:

Signal fidelity

Setting 1: The game sends you the rawest and most "linear" tire physics. This is the closest signal to what the developers designed. You feel the micro-details (the exact moment the front tire bottoms out) without any artificial enhancement.

Setting 10: The game applies a kind of artificial "compression" or amplification. Everything becomes very (too) responsive. This creates digital "noise" that masks the true feel of grip.

Avoiding "Clipping"

At 10, the game emphasizes small effects so much that as soon as you enter a fast corner (like Raidillon at Spa), your base 8 Nm reaches its maximum immediately.

Result: The steering wheel becomes a flat, rigid bar. You lose all nuance between "it grips" and "I'm sliding." At 1, you retain enough leeway to feel weight shifts.

Center stability

The BMW GT2 steering wheel on the GT7 tends to wobble. At 10, this instability is multiplied tenfold. The steering wheel becomes twitchy and can start vibrating violently in a straight line. At 1, the steering wheel is much calmer and more planted.

Predictability (TCS 0)

If you drive without TCS, you need to feel the rear end break away progressively. The setting at 10 makes the force feedback too abrupt, which can cause you to overcorrect and spin out. At 1, the information arrives smoothly, giving you time to react.

That's it for my settings and explanations for the GT DD PRO, especially with the BMW M3 GT2 V2 wheel. The settings may vary with other wheels.

Let me know what you think and if you like these settings 

👍😉

GG
Greg G.20 Edited
· 16 Sep 2025, 19:49

Hello,

Thank you very much for these settings.

I have the GT DD Pro 8 NM and and the BMW M3 GT2 V2.

Which settings would you recommend with this steering wheel ?

The ones at the top of the page  or the ones at the bottom of the page ?

The BMW is 32 cm in diameter.

Do you have any recommended settings for drifting?

Thank you in advance for your response and the follow-up you are doing on the settings 🙏

TY
T. Y.5
· 31 Aug 2025, 20:21

Hello. I like your recommended settings of DD Pro 8um. How about settings of "dynamic FFB" in FANATEC application (FanaLab)? Should it be disabled to reduce lap times?

 

M.Matika
M.Matika6239
Replied to T. Y. · · 1 Sep 2025, 01:00

To be honest, I'm not entirely sure that setting makes much of a difference in terms of performance.

TYReplying to T. Y.·
Hello. I like your recommended settings of DD Pro 8um. How about settings of "dynamic FFB" in FANATEC application (FanaLab)? Should it be disabled to reduce lap times?  
J
Jamilnation10
· 20 Aug 2025, 23:42

Which settings can you recommend for 5Nm?

M.Matika
M.Matika6239
Replied to Jamilnation · · 22 Aug 2025, 12:36

You can try my settings but change in-game to 8 or 9. But use it only as a recommendation, of course you can change some settings and tweak to your liking.

JReplying to Jamilnation·
Do you mean I should keep the base on its default settings (as it was from new), or should I use the custom settings you wrote above and just increase the in-game Max Torque to 8 or 9?
J
Jamilnation10
Replied to M.Matika · · 22 Aug 2025, 00:29
M.MatikaReplying to M.Matika·
I would just increase the Force Feedback Max Torque to a higher number, like 8 or 9 maybe. That's only in the game, leave the base as is.

Do you mean I should keep the base on its default settings (as it was from new), or should I use the custom settings you wrote above and just increase the in-game Max Torque to 8 or 9?

M.Matika
M.Matika6239
Replied to Jamilnation · · 21 Aug 2025, 01:04

I would just increase the Force Feedback Max Torque to a higher number, like 8 or 9 maybe.

That's only in the game, leave the base as is.

JReplying to Jamilnation·
Which settings can you recommend for 5Nm?
G. Ramos
G. Ramos102
· 8 Apr 2025, 05:24

Are you still using 4 torque for Group 2 cars Digit?

M.Matika
M.Matika6239 Edited
Replied to G. Ramos · · 8 Apr 2025, 10:57

On a 8nm wheelbase I would maybe go to 5 or 6. It really depends on what you like.

G. RamosReplying to G. Ramos·
Are you still using 4 torque for Group 2 cars Digit?

 

MT
Marijus Tamašiūnas6
· 22 Mar 2025, 23:07

Hi this settings for dd pro 8 nm still ok? After update 1.56? Thanks

M.Matika
M.Matika6239
Replied to Marijus Tamašiūnas · · 23 Mar 2025, 00:31

 

MTReplying to Marijus Tamašiūnas·
Hi this settings for dd pro 8 nm still ok? After update 1.56? Thanks

Yes, I didn't change them.

 

G. Ramos
G. Ramos102
· 11 Mar 2025, 06:42

Feels fantastic wow night and day difference from just defaults. Do you use 5 torque or 6 torque typically for GR3 cars?

M.Matika
M.Matika6239
Replied to G. Ramos · · 11 Mar 2025, 12:29

 

G. RamosReplying to G. Ramos·
Feels fantastic wow night and day difference from just defaults. Do you use 5 torque or 6 torque typically for GR3 cars?

It depends on the car, but I would probably go with 6.

 

M.Matika
M.Matika6239
· 16 Feb 2025, 20:20

I updated the settings for 2025.

SEN - AUT
FFB - 100
FFS - Peak
NDP - 15
NFR - 10
NIN - 5
INT - 3
FEI 100
FOR 100
SPR - OFF
DPR - 50
BLI User Preference
BRF User Preference
PLEASE NOTE THAT THESE SETTING ARE FOR 8NM WHEELBASE.

*Updated January 2025

 

M.Matika
M.Matika6239
Replied to Martin Bartos · · 21 Apr 2026, 12:35
MBReplying to Martin Bartos·
Hello, any settings update for 2026 (8NM)? Actual firmwares: Wheel Base Motor: 1.0.3.2 Wheel Base: 1.6.1.2 Steering Wheel: 8 Wireless Quick Release: 6.0.1.1 Thank you.

The settings don't change that often, but you can check my DD+ settings. 

https://www.dg-edge.com/articles/guides-equipment/fanatec-wheel-settings-guide-2026-recommendation/633

MB
Martin Bartos6
Replied to M.Matika · · 17 Apr 2026, 21:23
M.MatikaReplying to M.Matika·
I updated the settings for 2025. SEN - AUT FFB - 100 FFS - Peak NDP - 15 NFR - 10 NIN - 5 INT - 3 FEI 100 FOR 100 SPR - OFF DPR - 50 BLI User Preference BRF User Preference PLEASE NOTE THAT THESE SETTING ARE FOR 8NM WHEELBASE. *Updated January 2025  

Hello, any settings update for 2026 (8NM)? Actual firmwares:

Wheel Base Motor: 1.0.3.2

Wheel Base: 1.6.1.2

Steering Wheel: 8

Wireless Quick Release: 6.0.1.1

Thank you.

M.Matika
M.Matika6239 Edited
Replied to R. Tsolakidis · · 18 Feb 2025, 17:31

 

That stayed the same. 

Force Feedback Max Torque: 6 or 7 (Depends on the car)
Force Feedback Sensitivity: 10

R. TsolakidisReplying to R. Tsolakidis·
What about your in-game settings (controller)?

 

R. Tsolakidis
R. Tsolakidis160
Replied to M.Matika · · 17 Feb 2025, 18:21

What about your in-game settings (controller)?

M.MatikaReplying to M.Matika·
I updated the settings for 2025. SEN - AUT FFB - 100 FFS - Peak NDP - 15 NFR - 10 NIN - 5 INT - 3 FEI 100 FOR 100 SPR - OFF DPR - 50 BLI User Preference BRF User Preference PLEASE NOTE THAT THESE SETTING ARE FOR 8NM WHEELBASE. *Updated January 2025